Polishing Boots/Shoes

Here’s how to apply that high-gloss spit shine:

  1. Spread a medium-thick layer of paste polish over the portion of the boot to be spit shined.
  2. Allow it to dry for 5 to 10 minutes.
  3. Wrap a soft, clean cloth (a T-shirt that you will never wear again will work) around your index finger so that it is smooth (no wrinkles). . Dip your finger into a container of water. The cloth should be wet, but not dripping.
  4. Buff the dried polish (using a circular motion) with the wet cloth, until the wax starts to become shiny.
  5. Still using the damp rag on your finger, apply a fine layer of polish in a circular motion and keep on rubbing lightly until a hazy shine develops.
  6. Using the (now) damp cloth, keep applying THIN coats of wax, buffing them with a small circular motion.
  7. When the boot is highly glossed, use a clean dry soft cloth or a shining brush to give it a final buff.


  1. The reason to use a wet cloth is to stop the fine coats of polish sticking to the cloth and to encourage the polish to stick to the leather.
  2. You want to keep on building up thin layers of wax until you have a completely smooth surface that gives the glossy shine.
  3. After the first heavy coat of polish you must use small amounts of polish to build up the shine. If you use too much polish, it will dissolve the base you have already built up.
  4. T-shirts work well for the cloth material, as do cloth diapers.

What You Need:

  • Shoe Polish (for best results, use Kiwi Parade Gloss)
  • Cloth
  • Water